Inside the Factory - Chicken House Solutions

News

6 Essential Steps To Install H Type Chicken Cages Properly On Poultry Farms
Jun 18, 2026
  • H type cage systems support modern poultry automation infrastructure with multi tier layouts.

  • Installation precision influences mechanical stability and long term operational efficiency across poultry houses.

  • Engineering alignment determines feeding consistency and manure transport reliability during production cycles.

  • Environmental integration improves ventilation balance and reduces ammonia accumulation inside housing structures.

  • Structural coordination between steel frames and control systems ensures stable commercial egg output conditions.

Get professional poultry farm construction guidance, equipment selection solutions, and the latest price lists, whatsApp to +8618830120193, click to learn more:

Taiyu (HK) Group Equipment

Taiyu (HK) Group Equipment



Step Survey Building Conditions Before Installation



Accurate building evaluation ensures correct placement of H type chicken cage system structures.

Floor flatness, column spacing, and roof clearance must be measured using laser instruments.

Installation of H type chicken cage system requires controlled alignment for mechanical balance and durability.

Data is for reference only.Swipe horizontally to view full table.

Building Measurement ParameterValue
Aisle Width (Mm)Installation path set at 1200 mm
Ceiling Clearance (Mm)Maintenance zone measured at 2500 mm
Column Spacing (M)Structural grid defined at 6 m
Laser Tolerance (Mm)Measurement deviation at 2 mm
Expansion Gap (M)Structural gap set at 30 m

Proper surveying reduces structural correction work during assembly phases.



Step Foundation Preparation And Structural Base Work



Concrete curing ensures stability for heavy H type chicken cage system loads.

Anchor bolts positioning determines final frame alignment accuracy during installation stages.

Installation of H type chicken cage system requires controlled foundation reinforcement for multi level load support.

Data is for reference only.Swipe horizontally to view full table.

Foundation Specification ParameterValue
Concrete Density (Kg/M³)2400 kg/m³ mixture ratio
Curing Time (Days)28 days hydration cycle
Anchor Bolt Type (Mm)M16 steel grade fastening
Moisture Level (%)Below 5 percent condition
Surface Flatness (Mm)3 mm tolerance range

Stable base construction reduces long term deformation risks.



Step Steel Frame Assembly And Alignment Process



Steel structure assembly determines spatial stability of H type chicken cage system tiers.

Bolted connections must follow torque sequence standards for uniform load distribution.

Installation of H type chicken cage system depends on precise vertical and horizontal calibration.

Data is for reference only.Swipe horizontally to view full table.

Steel Structure ParameterValue
Galvanization Coating (G/M²)275 g/m² zinc coating
Steel Strength (MPa)350 MPa tensile resistance
Bolt Grade (Class)8.8 structural bolts
Frame Deviation (Mm)Maximum 2 mm alignment
Inspection Interval (M)5 m structural checkpoints

Correct alignment ensures synchronized cage layer performance.



Step Install Feeding And Drinking Automation System



Feeding system calibration ensures uniform feed distribution across all cage rows.

Water line installation maintains pressure balance for nipple drinking equipment.

Installation of H type chicken cage system improves automation efficiency in poultry feeding cycles.

Data is for reference only.Swipe horizontally to view full table.

Feeding System ParameterValue
Feed Chain Speed (M/Min)18 m/min conveyor speed
Hopper Capacity (Kg)120 kg feed storage unit
Nipple Flow Rate (Ml/Min)60 ml/min water delivery
Pipe Diameter (Mm)25 mm water pipeline
Line Spacing (Mm)300 mm distribution spacing

Stable feeding control reduces uneven growth performance.



Step Egg Collection And Manure Removal Installation



Egg belt installation supports automatic egg transport with minimal breakage risk.

Manure belt system maintains hygiene balance inside H type chicken cage system environments.

Installation of H type chicken cage system enhances automated waste management efficiency.

Data is for reference only.Swipe horizontally to view full table.

Conveyor System ParameterValue
Egg Belt Speed (M/Min)5 m/min transport rate
Manure Belt Speed (M/Min)4 m/min waste removal speed
Belt Thickness (Mm)1.2 mm PVC layer
Motor Power (Kw)0.75 kW drive unit
Roller Diameter (Mm)89 mm steel roller

Balanced motion reduces egg damage probability.



Step Electrical And Environmental Control Installation



Electrical wiring must follow poultry automation safety protocols for stable operation.

Ventilation and lighting systems regulate internal climate of H type chicken cage system houses.

Installation of H type chicken cage system requires synchronized control panel configuration.

Data is for reference only.Swipe horizontally to view full table.

Electrical ParameterValue
Supply Voltage (V)380 V 3 phase system
Control Voltage (V)24 V low voltage circuit
Cable Rating (V)600 V insulation standard
Generator Frequency (Hz)50 Hz backup system
Lighting Efficiency (Lm/W)150 lm/W LED system

Stable power ensures uninterrupted poultry operations.



Step System Commissioning And Trial Operation



Full system testing validates installation accuracy before bird placement begins.

All automation modules must operate simultaneously under controlled test cycles.

Installation of H type chicken cage system completes verification through continuous runtime monitoring.

Data is for reference only.Swipe horizontally to view full table.

Commissioning ParameterValue
Test Duration (H)24 hours continuous run
Feed Cycle (Min)8 min distribution loop
Leakage Points (Count)0 recorded leakage zones
Conveyor Cycles (Rounds)50 full operation cycles
Signal Delay (Ms)Less than 100 ms response

Stable commissioning confirms operational readiness.



Documentation And Technical Verification Process



Engineering documentation records every installation stage for traceability.

Equipment serial mapping ensures future maintenance compatibility and system upgrades.

Installation of H type chicken cage system requires structured technical archiving for lifecycle management.

Data is for reference only.Swipe horizontally to view full table.

Documentation ParameterValue
Drawing Revision NumberRev 3.2 update set
Equipment Serial FormatISO tracking system
Inspection Record Pages45 pages compiled report
Photo Archive Count120 installation images
Maintenance Cycle Plan12 month review interval

Structured records support long term asset management.



Frequently Asked Questions



Q1: What is the ideal space requirement for H type chicken cage installation?

The recommended spacing depends on building layout and ventilation design.

Most systems operate within 900 mm service corridor and 1200 mm aisle width standards.

Proper spacing improves airflow distribution efficiency around 3.5 m³ per bird.

Q2: How long does installation of H type chicken cage system take?

Typical installation cycle ranges from 20 to 35 days depending on facility size.

Steel frame alignment and automation calibration consume most of the timeline.

Large farms with 50,000 bird capacity may extend commissioning by additional 7 days.

Q3: What is the recommended maintenance cycle after installation?

Routine inspection is recommended every 30 days for mechanical components.

Electrical systems require quarterly verification to ensure stable 380 V operation.

Conveyor belts and feeding lines should be adjusted after 500 operational hours.



Taiyu (HK) Group - One Of China Biggest H Type Chicken Cage Manufacturer



  • H type chicken cage system applied in 30,000 bird commercial poultry house with automated feeding and egg collection integration achieving stable production cycles above 95 percent uptime reliability.

  • Global factory direct supply structure supports standardized poultry equipment manufacturing with modular steel frame production and export logistics covering Asia Africa and Latin America regions.

  • Poultry equipment engineering includes cage system design ventilation integration and manure removal automation suitable for broiler and layer farming industrial scale applications.

  • Turn key engineering service provides complete poultry house planning equipment installation commissioning and operator training under unified technical project management system workflow.



Contact Us To Received Your Customized Poultry Farm Plan



Headquarters And Branchs

poultry farm

Hong Kong Headquarter Management Team


  • Hong Kong Headquarter Taiyu Industrial Group CO., LTD

  • China Hebei Best Machinery And Equipment CO., LTD

  • Nigeria Vanke Machinery And Equipment CO., LTD

  • Tanzania Best Machinery And Equipment CO., LTD

  • Ethiopia Best Hebei Machinery Manufacturing PLC


supplier and manufacture chicken cage and poultry farm equipment (2)

China Branch


supplier and manufacture chicken cage and poultry farm equipment (3)

Nigeria Branch


supplier and manufacture chicken cage and poultry farm equipment (4)

Tanzania Branch


chicken cage design (1)

Ethiopia Branch


Reception /24 WhatsApp NO. : +8618830120193

Email:sales@bestchickencage.com

FAQ

Q:

How To Manage Lighting Programs In H-Type Layer Cage Houses?

A:
Provide 14–16 hours of light daily
Ensure even light distribution
Promotes laying rhythm
Egg production rate: 90-98%
FCR 1.9–2.1
Q:

What Are The Cleaning Procedures For H-Type Battery Cage System?

A:
Regularly flush cages and conveyor belts
Use environmentally safe disinfectants
Clean manure troughs
Reduce pathogen spread
Egg production rate: 90-98%
Q:

How To Expand H-Type Chicken Cage Farm Without Reducing Efficiency?

A:
Add additional multi-tier cages
Maintain automated feeding and drinking systems
Ensure uniform ventilation and lighting
Farm capacity per house: 30,000 - 100,000+0 birds
Labor savings: 70-90%

Product Recommendations